Varilight V-Pro 4 x 10W-250W 2 Way Push Rotary LED Dimmer Switch Trailing Edge in White Plastic

• V-Pro Dimmer are suitable for Dimmable LEDs, Dimmable ESLs, Electronic Transformers, Trailing Edge, Standard Bulbs, GU10 and Mains Halogen
• The Varilight V-Pro Series eliminates dimmer buzz for the GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads. It is equipped with Self Re-setting Overload Protection to handle overload situations, for example if the wattage of the bulbs/lamps are too high on a circuit. The dimmer also contains a heat sensor which again stops damage to the dimmer if it becomes too hot.
• This dimmer has Soft Start Technology which allows a longer life span of the bulbs or lamps by gradually increasing the brightness level. 
• The Varilight V-Pro Series were primarily designed for Dimmable LED's. The dimmers, with a minimum load of only 10 Watts can operate at least 1-20 good quality Dimmable LED's working especially well with the manufacturers, Philips and Toshiba.
• This dimmer can also be used to operate up to 12 Varilight (YCA20D) or Megaman Dimmable Energy Saving Lamps, (Please refer to the instruction leaflet of the Megaman lamps for usage tips).

• The V-Pro Series Dimmers can also be used for mains incandescent GLS lamps (standard mains light bulbs), GU10 Lamps or similar Hi Spot Mains Halogen lamps, (only use quality UK supplied lamps), up to the maximum load as specified on the dimmer.
• The V-Pro Series Dimmer can NOT be used for wire-wound Low Voltage transformers, Fans or inductive loads.
• This LED Dimmer is suitable for
• Mains voltage incandescent GLS or candle-shaped bulbs;
• Good quality dimmable electronic low voltage transformers (including  those requiring trailing-edge control) GU10 or similar good quality mains halogen bulbs;
• Most dimmable LEDs 
• Installation: it fits a 25 mm deep wall box
• Load: Max Load 250W, Min Load 10W per gang
• White control knobs in white
• Push ON/OFF with rotary dimming.
• Not suitable for wirewound transformers and fans. 
• Overload and short curcuit protection
• Soft start
• Low noise operation
• Suitable for LED lamps

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• JQDP254W.pdf (39.01 kB)