Hager VML916CU 16 Way High Integrity Consumer Unit 100A Switch 2x100A 30mA RCCB Configurable

This is the Hager VML916CU 16 Way High Integrity Consumer Unit Configurable with 100A Main Switch and 2 x 100A 30mA type A RCCBs, Hager Fuseboard at Sparks. It is the Hager VML916CU 18th edition Consumer Unit, a 16 way flexible Split Load complete with 100A switch disconnector isolator and 2 x 100A 30mA type A RCCBs - the MCBs are not included. This consumer unit supersedes the Hager VML716CU. 

Please note: this board does not include the MCBs, these need to be ordered separately. It takes the MTN range type B SP 6kA MCBs: MTN106 (6A), MTN110 (10A), MTN120 (20A), MTN132 (32A), MTN140 (40A), and MTN150 (50A) - to be ordered separately (add to the basket the required quantity of each).

It is a high integrity twin RCD board. It is a metal enclosure completely supplied with a full metal DIN rail and full complement of earth and neutral terminals, along with the necessary labels, busbar, and instructions. It is part of the Hager Designer 10 consumer units. 

Please note: to make it SPD, you also need to purchase VM02SPD.

Hager 16 Way Configurable Consumer Unit 18th Edition Surface Mounted - Specs

• Model: Hager VML916CU Design10 18th Edition 16 Way High Integrity Cf 100A Switch 2*100A 30mA type A RCCB
• It comes complete with 100A Switch Disconnector Isolator and 2 x 100A 30mA type A RCCBs
• BS 7671:2018, 18th edition compliant
• Mounting: for surface mounting only
• Dimensions: 246mm x 478mm x 100mm
• It comes supplied with 2 x 100A 30mA Type A RCDs and 1 x 100A DP isolator
• The 100A DP Main switch controls the entire board and allows for up to 16 x RCBO's or MCB's circuits 
• It comes with 2 x 100 Amp 30mA RCD allowing form RCD circuits to be split around a building 
• The max number of MCBs or RCBOs is 3 + 3, split load board
• It has a dual 100 Amp 30mA RCD Protection 
• The terminal bars are top mounted allowing for easy cable dressing - fully rated to 100A
• This board allows 100% RCD Protection 
• This board conforms to BS EN 6439-3 including Annex ZB (16kA rating) 
• This board allows for RCD Exemptions on MCBs 
• Standards: BS EN 61439-3
• Rated & Operational Voltage (Un/Ue): 230V a.c 50 Hz
• Rated Insulation Voltage (Ui): 320V a.c. 50Hz
• Rated Frequency (fn): 50 Hz
• Rated impulse withstand voltage (Uimp): 4kV
• Rated Current of the Assembly (InA): 100A
• Rated Current of an Outgoing Circuit InC: MCB 6A-63A (Marked Rated Current on Device)
• Rated Conditional Short Circuit of the Assembly (Icc) Annex ZB: 16kA rms at 250V, power factor 0.6 with equipment and arrangements specified in Hager's technical documentation/catalogue
• Rated Current of the Assembly Circuit (InC) RCCB 100A (Marked Rated Current on Device)
• Protection against electric shock: Consumer Unit shall be installed in an electrical system conforming to IEC 60364 / BS 7671
• Rated Diversity Factor (RDF) / Values of assumed loading 10 Way and above - 0.5
• Degree of protection: IP2XC with door open / closed and full compliment of devices / blanks fitted. Note: Where cables are installed through the top wall of the enclosure, gaps of
• Intended use: Intended for use in domestic (residential) or similar premises
• Electromagnetic compatibility (EMC) classification EMC environment B
• External design: Wall mounted, surface type, enclosed assembly.
• Mechanical impact protection: IK05
• Type of construction: Fixed parts
• Incoming Line/Neutral terminal: 50mm²
• Depth of installed product: 100 mm
• Height of installed product: 245 mm
• Width of installed product: 476 mm
• Type of door closing: non keylock
• Interlockable: No
• Weight: approx. 5.58kg
• Model: Hager VML916CU 16 Way HI Cf 100A Switch 2*100A 30mA RCCB

Hager Design 10 Split Load 100A Features and Benefits

• Type A RCCBs for general purpose circuits and circuits containing equipment incorporating electronic components.
• Square cable entry points top and bottom for use with cable trunking
• Meter tail cable entry plate (VM04CE) provided
• Rigid top wall – Enhances rigidity to prevent distortion when removing knockouts
• Rear Knockouts for ease of cable entry – Cable protector plate (VM02CE) available as accessory
• Front cover retained screws – Prevents loss during installation
• Full metal DIN rail – Secure and stable attachment of devices
• Quick release clip on MCB – Allows removal of MCB with busbar still in place
• Optimised cabling space – DIN rail position allows maximum cabling space.
• Top mounted terminal rail for each row makes the wiring of the neutral and earth connections neat and simple.
• Torque settings displayed inside front cover – easily accessible to electrician during installation and maintenance

Note: the picture is for information purposes only; see the dimensions and specifications of this consumer unit.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• VML916CU-data.pdf (758.48 kB)
• VML916CU-datasheet.pdf (34.41 kB)
• VML916CU-datahseet2.PDF (758.48 kB)