Fike Twinflex Pro 8 Zone Fire Alarm Control Panel for Conventional 2-wire Fire Alarm System

This is the Fike Twinflex Pro eight zone fire alarm panel (panel only), an intelligent analogue non-addressable panel which is capable of running up to 256 devices.

Please note: this panel comes without the battery; it needs to be ordered separately. See the Required item. 

The devices communicate with the control panel using the Twinflex data protocol, which is based on a conventional cabling format.  A conventional 2-wire fire alarm system is often the natural choice for smaller applications or where budget constraints exist.

Note: this item is non-returnable; we are not able to take it back as "unwanted". Please make sure that this is the exact item you require before ordering.

Fike’s TWINFLEX pro 2-wire fire alarm system has long been known for its adaptability and cost-effectiveness within a variety of applications, big or small, making it one of the most flexible products on the market.

Building on those strengths, and designed for ease of use and state-of-the-art monitoring, the LPCB-Approved TWINFLEXpro is the next generation in 2-wire fire alarm reliability.

Two wire installation - only one circuit per zone to connect detectors and sounders - installation savings can be as high as 40%.  This versatile fire alarm panel incorporates Fike’s Multipoint detection system using smoke and heat detectors with built-in sounder, allowing the whole system to be installed using only one pair of wires per zone.

Fike Twinflex Pro 8 Zone Fire Alarm Control Panel for Conventional - Features and Benefits

• Alarm control panel Fike Twinflex Pro eight zone (Rafiki)
• System: 2-wire fire alarm system
• Highlighted selection menu
• Front panel LCD display (4 lines x 20 characters)
• Differentiates between callpoint and detector alarms
• Event log storing up to 500 events
• Up to 32 devices per zone
• Compatibility: this panel is compatible with all previous Rafiki Twinflex devices
• CE marked, BS EN54-4, BS5839: Part 1: 2002

Fike Twinflex Pro 8 Zone Fire Alarm Control Panel for Conventional - Technical specs

• Number Of Zones: 8, Eight Zone Fire Alarm panel
• Max Zone Length: 500 Meters
• Zone Loading: 27 SLU (32 Devices Max.)
• Zone Operating Voltage: 29.9V DC Nominal
• Standby Battery Requirement: 2 x 3.3Ah 12v Sealed Lead Acid
• Dimensions: 331 x 331 x 99 mm
• LCD Display: 4 lines of 20 characters
• Zone Labels: 12 characters
• Event log of max. 500 events
• Max Zone Current: 250mA
• Operating Temperature: +5C to +40C
• Mains Supply Range: 230V AC, +10%, -15%, 50/60Hz
• Inputs: 1 x resistance monitored input (3k3 EOL, 680R firing resistor), 2 x un-monitored inputs
• Fault Output: 1 x volt free relay (30V DC @ 1A max.)
• Fire Outputs: 1 x volt free relay (30V DC @ 1A max.), 2 x 24V conventional sounder circuits (10K EOL, 315mA max.)
• Model: Fike Twinflex Pro 8 Zone Fire Alarm Panel (Rafiki 505 0008)

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.