Sale Icon
Review Icon
Free Delivery Icon

Rako RMS800 Wireless In-Line RF Switch Module for Non-Dimmable Loads up to 800W

Model No. RDS800C by: Rako Controls
Availability: Usually 3-5 days

£110.00

Ex. VAT
Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Click & Collect
Order online & collect in store

This is the Rako Controls RMS800 in-line RF switch module ideal for non dimmable loads. If it is connected in-line before the first lighting fitting, the Rako RMS800 enables switching of up to 800VA of non-dimmable loads. This in-line wireless switching module is ideal for extractor fans, LEDs, non-dimmable fluorescents. It can be controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.

Please note: this item is non-returnable; due to the fact that it has an electronic component, we cannot take this item back for a refund.

Rako RMS800 In-Line RF Switch Module 800W - Features

  • It is designed to fit in a ceiling void or a cupboard.
  • It can control up to 800VA of mains non-dimmable lighting loads.
  • Can be used for exterior lighting applications when used with a weatherproof IP rated enclosure (ordered separately).
  • 16 Scene memory capacity. 
  • Can be fully integrated with Rako wired systems.
  • Easy to set up and manual ON/OFF control using the set-up button. 
  • Full rising clamp terminals. Mounting bracket. Easy to install. 
  • It can be programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMS800 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory.
  • Can be controlled from any other Rajo transmitter such as RCM/RCP wall-plates, RAH hand-helds, and Bridge modules. 
  • Forms the foundation of any Rako wireless scene-set system.

Rako RMS800 In-Line RF Switch Module 800W - Specs

  • Dimensions: 138mm x 46mm x 40mm
  • Input supply: 230V AC +/-10% 50Hz
  • Weight: 205g
  • Housing: UL V0 material
  • Temperature: +2degC to +40degC
  • Humidity: +5% to 95% non condensing
  • Connections: 3 way screw terminals for mains power
  • Protection: Auto resetting over current protection, Auto thermal shutdown, Voltage surge protection
  • Load types: All non dimmable lighting loads e.g. Extractor fans and water pumps.
  • Minimum load: N/A
  • Maximum load: 800VA
  • Terminal sizes: 4mm2
  • Emissions - EN61000-6-3 : 2001
  • Immunity - EN61000-6-1 : 2001
  • Communication: Rakom coded fm radio, 433.9MHz
  • Memory: Flash memory (non volatile)

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Videos of Rako Wireless and Wired LED Dimming Solutions for Home or Office

We at Sparks love the people at Rako and their great products, and we're so glad that they put out quite a few videos to introduce some of their dimming solutions. They offer a flexible and extendable dimming solution "at the click of a button" or at the "touch" of the iPad/iPhone app for both domestic and commercial environments. In this article, we're introducing three main videos: the Rako whole house dimming and scene control setting system, the wireless LED dimmer controller, and the Rako LED dimming control solutions. Rako Whole House Dimming and Scene Control Setting System - Video The Rako whole house dimming and scene control system is great for both residential and commercial applications. Via the programmable scene control panel, you can change the lighting scene setting. For example, in the kitchen, you can have scenes like food prep, family dining, entertainment, party, etc. In the living room, you can easily use the Rako iPad / iPhone app to set all the lights ON, or have scenes like watching a movie (home cinema), reading a book, relaxing, etc. Also, you can control the lights, the blinds, and the curtains in multiple rooms from a single control point, turn all the lights off from a single point, link the Rako lighting to a security system, or schedule timed events. Buy While House Dimming System Rako Introduces the Wireless LED Dimmer Controller The wireless dimmer controller Rako RMT500 is a single-ended dimmer, a wireless module, ideal for the latest LED lamps, with control over IP by using Rako bridges and wall control panels. This LED dimmer is silent and it can be addressed by pressing the button on the front of the dimmer. It comes with 16 scenes and has longer fade rates. Follow the slideshow and watch the video below to find out more. Buy Rako Wireless Dimmers Rako LED Dimming Control Solutions - Overview There are so many ways to control the LED lights, and Rako provides quite a wide range of solutions for dimming the LED lights, whether mains dimmable, leading edge, and trailing edge (including the GU10 LED lamps, the LED fittings with a Mains Dimmable driver). Whether wireless or wired, the Rako dimming LED drivers and dimmers offer a wide range of LED dimming systems for domestic and commercial use. You can watch more such videos via Rako YouTube channel, and you can order a wide range of Rako Dimming systems and Rako Wireless / Wired systems via sparks at, Wireless Dimming Systems.

Rako RDS800C Wireless Switch for Non-Dimmable Loads(in-line ceiling switching module)

This particular Rako Wireless Module is the RDS800C Rako Lighting In-Line Switch for Non-Dimmable Loads max. 800w. The unit is connected in-line before the first light fitting, to enable switching of up to 800w of non dimmable loads. Ideal for extractor fans, LEDs, nondimmable fluorescents, garden water features and other switched-only loads. Controlled from any Rako RAKOM RF device, for example, the RCP07W push button RF wall plate.Designed to fit in a ceiling void or cupboard, the Rako Wireless RDS800C switching module can control up to 800 watts of mains nondimmable lighting loads.The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP-rated enclosure. The robust microprocessor design combines reliable switching with dynamic safety features such as auto-resetting over current and voltage surge protection. Programmed using either a Rako RCP07 RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus four preset scene levels in nonvolatile memory. Of course, the Rako RDS800C switch module can be controlled from any Rako transmitter such as RCP wallplates, RAH handhelds, MB1 timeclocks and forms the foundation of any Rako scene-set system. The Rako RDS800C in-line Switch - Technical Data 800W Ceiling mount switch module external aerial; Fluorescent and Switching Control Modules; The RDS800C in-line RF switch module is for non-dimmable loads; A compact 800w RF switch module; Minimum load: none; maximum load: 800w; Dimensions: 160 x 50 x 36mm; Weight: 230g; Input supply: 230V AC +/-10% 50Hz; Housing: UL V0 material; Climate range: Temperature +2C to +40C; Humidity: +5% to 95% noncondensing; Connections: 4 way screw terminals for mains power; Protection: Auto resetting over current protection, Auto thermal shutdown, Voltage surge protection; Load types: All nondimmable lighting loads, Extractor fans, Water pumps (garden water features); Terminal sizes: 1.5mm2 - Stranded, 2.5mm2 - Solid; Standards: EMC - EN 5001-1 :1992, Immunity - EN 50082-1 :1997; Communication: Rakom coded fm radio, 433.9MHz;Buy Rako Dimming Systems

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.

More from This Range

View the Smart Home Full Range