8 Output Mains Power DigiLink Amplifier with IR Bypass, 2-in, 8-out Distribution Amplifier Labgear LDL208R
£41.99
Ex. VAT
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
- All LDL amps can carry analogue and digital TV and radio, DAB, Freeview, DVB-T and DVB-T2 HD TV signals and have:
- More efficient Switch-Mode Power Supplies which run cooler
- Improved gain flatness delivering a better balance across the performance range
- Lower noise figure for optimised signal quality
- Greater signal handling capacity to cope with more channels
- Better impedance matching and therefore improved signal transfer from amp to cable
- Labgear amplifiers use F-type coaxial connectors for better matching and security
8 Output Mains Power DigiLink Amplifier with IR Bypass - Features
- Dual input amps, VHF 87-230MHz, UHF 470-790MHz
- Distribute signal from your digibox or *TV and radio aerial
- 9V DC on every output to power DigiLink eyes
- Return path for IR control
- LDL208R – 2-in, 8-out, mains powered DigiLink amp
- It is suitable for digital TV signal distribution Ch21-60 from a satellite receiver or from an aerial fitted with a 4G filter.
8 Output Mains Power DigiLink Amplifier with IR Bypass - Specs
- Number of Outputs: 8
- Number of Inputs: 2
- Frequency Range: 87-230/470-790MHz
- Gain: 10dB
- Noise Figure: Typ. <4dB
- Isolation Between Outlets: 20dB
- Max Output Level (IMA3 -60dB): 86dBµv
- Return Path Range: 5-30MHz
- Return Path Gain: 6dB
- Power for DigiLink Eyes: 9V 15mA short circuit protected
- RED, EMC, & LVD: Compliant
- Power Required: 220-240V~50/60Hz at <3W
- Packaging Length: 33cm
- Packaging Width: 10cm
- Packaging Height: 5cm
- Product Weight: 502g
- Product & Packaging Weight: 560g
- Dimensions: 265mm x 95mm x 35mm
General Safety Precautions
- To Prevent Overheating
The recommended clearances and other precautions given in these instructions must be observed to prevent overheating. In addition, units should not be positioned where they are likely to become covered by curtains, fabric or insulating material. The amp should not be left resting on a carpet. - Other precautions
These appliances are not waterproof, they are intended for indoor use only and must not be positioned where they could be exposed to dripping or splashing water. Objects containing liquids should not be placed on or near the amplifier. To prevent fire, make sure the unit and attached cabling is installed well away from naked flames. - Mains Plug
Your amplifier is supplied with a standard mains plug already fitted, if you need to change the plug use a competent professional (ELECSA or NICEIC) to make the connection. If you need to change the fuse use a 3 Amp fuse to BS1362 carrying the ASTA or BSI approved mark and refit the plastic fuse carrier.
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
Need more detailed specs?
Shipping
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
Returns
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.