Hager VML910CUSPD 10 Way Dual RCD High Integrity Configurable Consumer Unit Switch 2 x 100A 30mA RCCB with Type A SPD

This is the Hager VML910PD 10 Way High Integrity Configurable Consumer Unit 100A Switch 2 x 100A 30mA RCCB Type A SPD with Surge Protection - the MCBs are not included, Hager Fuseboard 18th Edition at Sparks. It is the Hager VML910CUSPD - a Hager Design10 18th Edition all-metal High Integrity 10 Way Consumer unit, a Flexible Split Load Consumer Unit with 100A Switch Disconnector Isolator, 2 x 100A 30mA type A RCCB and with Type 2 Factory Fitted Surge Protection Device.

Please note: this board does not include the MCBs, these need to be ordered separately. It takes the MTN range type B SP 6kA MCBs: MTN106 (6A), MTN110 (10A), MTN120 (20A), MTN132 (32A), MTN140 (40A), and MTN150 (50A) - to be ordered separately (add to the basket the required quantity of each).

It is a 10 Way High Integrity 100A Switch 2x 100A 30mA with Factory Fitted Surge Protection. It is fully compliant with the 18th Edition of BS 7671:2018. It has a twin RCD split load configuration which protects a configurable bank of 10 MCBs / RCBOs split into two circuits. 

Hager 10 Way Configurable HI Consumer Unit VML910CUSPD - Specs

• Dimensions of installed product: 246mm height x 406mm width x 100mm depth
• 1 x 100A Double Pole Main switch to control the entire board and allow for up to 10 x RCBO's or MCB's circuits
• Fixing mode: surface-mounted
• 10 Way Consumer unit, with max number of MCB's or RCBO's being 10
• The main switch controls all circuits 
• This consumer unit has multiple fixing points
• It contains top, bottom and rear knockouts
• All Design 10 consumer units contain top, bottom and rear knockouts and a meter tail cable entry plate as standard 
• There are no restrictions under the DIN rail 
• The cable entries positioned for easy access to devices 
• It has an option for High Integrity with Individual RCBOs 
• RAL colour: RAL 9010 - pure white
• Material: steel
• Protection index IP: IP2XC
• Number of rows: 1; it can be accessorized.
• Door: no keylock on the door, not interlockable
• Door type: top hinged door
• There are cable entry protectors to prevent damage to cable caused by sharp edges 
• The rear cutouts optimised to give neater installation 
• The terminal bars are top mounted allowing for easy cable dressing - fully rated to 100A
• This board conforms to BS EN 6439-3 including Annex ZB (16kA rating) 
• There is a full range of accessories available
• Depth of installed product: 100 mm
• Height of installed product: 246 mm
• Width of installed product: 406 mm
• Weight: approx. 5.3kg
• Model: Hager Design 10 VML910CUSPD 10 way Configureable HI 100A Sw 2*100A 30mA RCCB Type A SPD

Hager Design 10 range - Features and Benefits

• 100A RCCBs allow the board to be installed with upstream protection offered by any rating of cut out fuse (60, 80 or 100A) without the need to calculate the sum of downstream devices to establish overcurrent requirements.
• Type A RCCBs for general purpose circuits and circuits containing equipment incorporating electronic components.
• High integrity layout allows RCBOs to be fitted separately to the RCCBs for reduction of nuisance tripping on essential circuits and splitting earth leakage across multiple RCDs
• Rear Knockouts for ease of cable entry – Cable protector plate (VM02CE) available as accessory (to be ordered separately)
• Front cover retained screws – Prevents loss during installation
• Full metal DIN rail – Secure and stable attachment of devices

Note: the picture is for information purposes only; see the dimensions and specifications of this consumer unit.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• VML910PD-install.pdf (1.44 MB)
• VML910PD-VML910CUSPD-datasheet.pdf (34.28 kB)
• VML910PD-instructions.pdf (1.65 MB)