Fike 204-0012 Twinflex Multipoint ASD Detector with Sounder and Strobe, Heat and Smoke

This is the Fike 204-0012 Twinflex ASD Multipoint detector complete with sounder and strobe, which can be used as a smoke, heat, or multisensor detector. It comes complete with the base plate. Multifunction smoke and heat detector with seven detection modes, ideal for the Fike Twinflex Pro range of 2-wire fire alarm control panels.

Note: this item is non-returnable; we are not able to take it back as "unwanted". Please make sure that this is the exact item you require before ordering.

The Twinflex Multipoint ASD is a plug-in type smoke detector that utilises a photo-electric sensing chamber to make a measurement corresponding to smoke density. The device also incorporates a thermistor sensing circuit to allow for accurate heat measurement. These elements allow the device to be configured to a smoke, heat or combined setting. This device is only compatible with the Twinflex control panels (and their associated detection and alarm equipment) and also incorporates a sounder beacon.

7 modes of detection: 3 x smoke detection modes, 3 x heat detection modes, and 1 x combination mode. You can select your required option using the in-built DIL switches located within the detector.

Fike 204-0003 Twinflex Multipoint ASD Detector - Features

• Part of the Twinflex Pro intelligent 2-wire fire alarm system.
• Complete with a built-in sounder and a mounting plate.
• Self-calibrates every 6h.
• Continuously monitors for dust contamination. 
• Can be used as a smoke detector, a heat detector, or a multi-sensor.

Fike 204-0003 Multipoint Detector - Technical Data

• Dimensions: 107mm diameter x 75mm
• Operating temperature: -10 deg C to +50 deg C
• Operating Voltage Range: 18V to 32V DC
• Operating Current Quiescent: 109 uA (Typical)
• End of line ON if applicable: +50 uA (Typical)
• Alarm Sounding – Sounder High: 10.54 mA (Typical)
• Alarm Sounding – Sounder Low: 4.92 mA (Typical)
• Alarm Sounding – Sounder Off: 2.58 mA (Typical)
• Alarm Activated: 17.92 mA (Typical) (in addition to Alarm Sounding)
• LED Operation Detector in Normal State (Smoke): Flash at 20 second intervals
• Detector in Normal State (Heat): Double flash at 20 second intervals
• Detector at EOL: Flash at 5 second intervals
• Detector in Fault: Flash at 1.3 second intervals
• Detector Detecting Fire: Flash at 0.7 second intervals
• Detector in Fire (once processed at panel): Continuous
• Sounder High: 2.0 SLU (V3 panel), 10.5 DLU (Pro panel)
• Sounder Low: 1.0 SLU(V3 panel), 5.0 DLU (Pro panel)
• No Sounder: 0.5 SLU(V3 panel), 3.0 DLU (Pro panel)
• Volume Level (@ 1m anechoic, Dual Tone): Sounder High: 90+ dB(A), Sounder Low: 70+ dB(A)
• Flammability: UL94-V2
• IP Rating: IP 21 rated

Note: picture is for information purposes only.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• 2040012.pdf (179.57 kB)