3kW Fan Assisted Heater for 600 x 600mm Ceiling Grid, 245m3/h Suspended Ceiling Fan Heater

The BN Thermic SCHG-30 Ceiling Grid Heater comes in an aluminium egg-crate grille construction for direct mounting into a ceiling grid formation. The fan-assisted heater provides 3kW of warm, inviting climes for commercial premises and is ceiling-mounted to allow for free access to the floor and wall space, which is an important consideration in all retail premises. 

It offers first-class, whole life value from a product that is built to the highest possible standard and designed to give years of hassle-free service. It is tailored for quick, hassle-free installation and has a range of control options, that maintain running costs at very low levels.

Fan settings can also be adjusted by a CS-7 wall mounted controller, for on/ off / high heat / low heat and fan only settings

It also features include a slim depth of only 153mm and an air inlet and outlet through the front panel, meaning there is no requirement for air supply from the ceiling void. It is pre-wired to a rear-mounted terminal enclosure, meaning there is a complete lack of unsightly exposed wiring in view. 

This model’s features include a auto-reset for over-temperature protection. It also simple to reduce the heat output in these cases by simply removing the link in the rear-mounted enclosure - it can drop to 2kW if needed. 

Typical applications for the SCHG-30 would be shops, changing rooms, entrance areas and commercial areas in general. 

Dimensions: 576mm (width) x 153mm (height) x 592mm (depth)

Basic manual control can be provided by the BN Thermic CS-7 controller offering on/off/high heat/low heat/fan only settings. Temperature control can be provided by the wall-mounted BN Thermic RST-TP tamperproof thermostat. When required a heater can be controlled by both CS-7 controller and RST-TP thermostat.

BN Thermic SCHG-30 Fan Assisted Heater - Features

• It provides warm air - ideal for commercial premises
• Ceiling mounting position allows free use of floor and wall space, an important consideration in retail premises
• First class whole life value from a product built to the highest possible standard and designed to give many years of trouble free service
• Low running costs by selecting from a range of control options
• Specifically designed for quick hassle free installation
• Typical Applications: Shops, Changing rooms, Entrance areas, Retail, Wholesalers, Charity shops, etc
• Sized specifically to rest in the T bar of 600 x 600 suspended ceiling grid.
• Improves air distribution - it has a white aluminium air diffuser. 
• Auto-reset over-temperature device: A safety feature, ensuring that the heater is switched off should the air flow become obstructed
• Rear-mounted terminal enclosures: Easy connection to power supply and optional remote mounted controller and/or wall mounted thermostat
• Low profile design with only 160mm clearance required above suspended ceiling: they are suitable for premises with restricted ceiling void

Fan Assisted Heater - Technical

• Recommended mounting height: 2.4m - 3.0m
• Mains voltage: 230V
• Airflow: 245m3/h; 3kW
• Dimensions: 576mm width, 592mm depth, 153mm height. 
• Required clearance above grid: 200mm.
• Safety distance from heater: 1.5m
• Noise level at 2m: 56dB (tested in factory)
• Designed to rest in the T bar of a 600 x 600 suspended ceiling grid
• Air inlet and outlet through front panel – no requirement for air supply from the ceiling void
• Colour: Exposed surfaces white RAL9016. Other surfaces zinc plated steel
• Finish: Epoxy polyester powder coating
• Construction: 0.9mm steel case, aluminium air diffuser in brilliant white.
• The fan: Tangential fan with low noise aluminium fan blades
• Assembly: Shaded pole high performance motor. Factory lubricated bearings (servicing not required)
• The heating element: High quality nickel-chrome resistance wire supported by ceramic plates and fitted with an automatically resetting over-temperature device
• Installation: Designed to rest in the T-bar of a 600 x 600 suspended ceiling grid. Recommended mounting heights 2.5m to 4m above floor level
• White aluminium egg-crate diffuser
• Pre-wired to rear mounted terminal enclosure
• Auto-reset over-temperature protection
• Weight: 9kg

IMPORTANT! A minimum clearance of 205mm is needed between the bottom of the false ceiling and the original roof/ceiling to allow installation of the heater. DO NOT use plastic type diffusers as these may be damaged by the heat. 

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• SCHG30-wiring.pdf (208.63 kB)
• SCHG30-instructions.pdf (683.98 kB)