24 Way Ryefield Board taking 100A Fuse Units, 24 Way TPN Fuseboard TP24AVS100

Introducing Ryefield Engineering TP24AVS100 24 Way Ryefield Board taking 100A Fuse Units,

24 Way TPN Fuseboard is available at Sparks for the best price! Ryelfield TPN Fuseboard - The Ryefield distribution boards are some of the most popular LV distribution fuseboards in the UK market since they offer a robust electrical wiring solution specifically for a multi-dwelling residential setting.

Note: This Ryefield Board is subject to a max. 2 weeks Returns policy as "unwanted" - we can take it for a refund of its value only within 14 calendar days period from its receipt. Please make sure this is the Ryefield Board you require before purchasing. 

Ideally to be used in conjunction with metering equipment, since they distribute the power from the main cut-out to the dwelling meters.

This Ryefield board is suitable for up to 24 flats, allowing 24 single ways using 100A fuses. 

Please note: the carriage charge for this Ryefield board is £45 + VAT (which will automatically be added at Checkout) due to the size and weight of the board. 

These boards are proven as the most cost-effective solution. Please note that Ryefield is pre-approved by DNO LV boards to distribute power in HMOs.

24 Way 100A Ryefield Board TP 24 AVS100 - Features

• Materials: the boards are made of 18g steel sheets with the case back drilled and embossed for wall fixing.
• Lift off the hinged cover with padlocking attachment and Multilock.
• The back of the case was drilled and embossed for wall fixing.
• Retro-fit Surge Ready for 18th Edition Compliance.
• Model: Ryefield Engineering TP24AVS/100 24 Way Ryefield Board taking 100A Fuse Units
• Provide separate circuit protection for each dwelling (circuit). 
• Finish - Case powder coated Dark Grey Shade BS381C 632 Full Gloss, Internal parts galvanised steel, fixings zinc plated.
• Standard main brass clamp and pinching screw circuit terminals - one per fuse unit.
• Standard main brass clamps: adjustable, to accept 25mm - 120mm stranded conductors.
• Brass earth block with pinching screw terminals and PME link.
• The neutral clamp with pinching screw circuit terminals: one per fuse unit. 
• Standard busbar: the current rating of max. 400A.
• Blank removable gland plates on the top and bottom are standard.
• Plain removable plates on the top and bottom are standard.
• Installation: It is recommended that registered electricians install this Ryefield board. 

Note: The Ryefield TPN pattern fuse boards range from 12 to 36 fuse ways spread over three phases as standard, specials on request. Email us for a quote.

24 Way Ryefield Board TP24AVS100 taking 100A fuse units - Specs

• 60 amp service type fuse units, it comes complete with 21x 100A fuses
• Dimensions: 815mm height x 500mm width x 180mm depth
• L1/L2/L3 in a 8/8/8 combination.
• The case is fabricated from 18g steel Sheets. Cases fabricated from 1.2 mm2 steel and powder coated.
• It provides 24 single ways, suitable for up to 24 flats taking 100A fuses.
• Finish: Case enamelled epoxy-polyester powder dark grey shade. Steel screws and component parts zinc plated.
• Rated fused short circuit current 50kA at 415V.
• Dielectric Test = 2.5kV for 1 minute.

At Sparks, you can get some of the most affordable Ryefield Boards, including the 24 Way TPN Distribution Board taking 100A fuses - cheaper than anywhere else! Order this Ryefield board online now!

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• RY24100 TP24AVS100 datasheet.pdf (126.25 kB)